7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
DRESS PROPERLY
• Do not wear loose clothing, gloves, neckties or jewelry (rings, wrist
watches). They can be caught in moving parts. Protective electrically
non-conductive gloves and non-skid footwear are recommended when
working. Wear protective hair covering to contain long hair, preventing it
from get caught in machinery.
PROTECT YOUR EYES AND FACE
• Any log splitter may throw foreign objects into the eyes. This can cause
permanent eye damage. Always wear safety goggles. Everyday
eyeglasses have only impact resistant lenses. They are not safety glasses.
EXTENSION CABLES
• Improper use of extension cables may cause inefficient operation of the
log splitter which can result in overheating.
• Be sure the extension cable is no longer than 10m and its section is no
less than 2.5mm
2
to allow sufficient current flow to the motor.
AVOID ELECTRIC SHOCK
• Check that the electric circuit is adequately protected and that it
corresponds with the power, voltage and frequency of the motor.
• Never open the switch / plug box. Should this be necessary, contact a
qualified electrician.
• Make sure your fingers do not touch the plug’s metal prongs when
plugging or unplugging the log splitter.
• Avoid excessive bending and twisting of the connection between the
power cord of the British plug and the junction box.
PREVENT FIRES
• Do not smoke or have open flames when operating or refilling the log
splitter with oil.
• Never operate the log splitter near a flame or spark. Oil is flammable.
Summary of Contents for LOGBUSTER V6
Page 24: ......
