Clarke Metalworker CL250M, Operating & Maintenance Manual

4

INTRODUCTION

Thank you for purchasing this CLARKE 250mm Metal Lathe.

The compact rugged construction and screw cutting capabilities, makes the
CL250M ideal for model makers etc.

The Machine is capable of turning up to a maximum diameter of 140mm and an
overall length of 250mm.

A full range of accessories is available from your Clarke dealer, so that the machine
is capable of Milling, producing short tapers, and metric threads, both left and
right hand. (see ‘Accessories’ for details).

Before attempting to operate this machine, please read this instruction manual
thoroughly  and follow all directions carefully. By doing so you will ensure the safety
of both yourself and others around you, and at the same time you should look
forward to long and trouble free service from your Clarke Metal Lathe.

GUARANTEE

This product is guaranteed against faults in manufacture for 12 months from date
of purchase. Please keep your receipt as it will be required as proof of purchase.

This guarantee is invalid if the product has been found to have been abused or
tampered with in any way, or not used for the purpose for which it was intended.
The reason for return must be clearly stated.

This guarantee does not affect your statutory rights.

IMPORTANT

This manual is intended to instruct the user on the operations peculiar to the

CL250M lathe ONLY.  Although some reference is made, and advice given,

regarding various metal turning techniques, it should not be regarded as a

general tutorial on the subject.

It is assumed that the user has some knowledge of machinery of this type,

and is familiar with metal turning. If this is not the case, we strongly advise

that you enrol in a course at a local education centre where possible, or

seek advice from a qualified person.