6
4. Set the grate in position inside the
stove as in Fig 3, complete with its
side rails.
5. Slip the wood retainer onto its
pegs inside the front door as
shown in Fig 4.
6. Set the top plate and cooking lids
in position on top of the stove
7. Place stove in desired location
according to the chimney
position in the building. Refer to
POSITIONING AND INSTALLATION.
8. Check that the door catch is
adjusted via the bolt on the inside
to provide a secure closing
action.
Fig 3
POSITIONING AND INSTALLATION
In England and Wales, there are only two routes to legally install a domestic
solid fuel or wood burning appliance. In other parts of the UK there are
variations in legislation and processes.
You can either:
• Use a registered installer who can self certify that the work he does
complies with the relevant Building Regulations; or
• The consumer applies to their local authority building control
department for a building notice, and pays the appropriate fee.
It is generally worthwhile to use a HETAS registered installer who will supply a
Certificate of Compliance as a record of the job and that it complies with
Building Regulations. A copy of the certificate is forwarded to HETAS who
notify the local authority on your behalf.
Failure to notify the work through the registration scheme (in this case HETAS)
or directly to the local authority can lead to enforcement. It can also cause
problems for future house sales if there is no official record of a compliant
installation. All local regulations, including those referring to National and
European Standards need to be complied with when installing this appliance.
Fig 4