background image

- 2 -

-13 -

CLARKE GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period
of 12 months from the date of purchase. Please keep your receipt as proof
of purchase.

This guarantee is invalid if the product is found to have been abused or
tampered with in any way, or not used for the purpose for which it was
intended.

Faulty goods should be returned to their place of purchase, no product
can be returned to us without prior permission.

This guarantee does not affect your statutory rights.

Please read these instructions carefully before operating the tool

Thank you for purchasing this 

CLARKE 

Pioneer Oil Free Air Compressor

Before using the device, please read this manual thoroughly and carefully follow
all instructions given. This is for your own safety and that of others around you, and
is also to help you achieve long and trouble free service from your new tool.

ACCESSORIES

A wide range of Airline accessories is available, including Filter/Regulators, Lubricators, High
Pressure Hoses from 5 to 100 Metres, etc. Contact your CLARKE dealer for further information,
or CLARKE International Sales Department on 01992 565300

PARTS & SERVICE TEL:  020 8988 7400

or    e-mail as follows:

PARTS:   Parts@clarkeinternational.com

SERVICE:    Service@clarkeinternational.com

NOTES

Summary of Contents for PIONEER 210 OF









Reviews: