14
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
REPLACING THE DRIVE BELT
1. Rotate the clips shown 90
degrees.
2. Remove the front of the cage
and take out the worn or broken
drive belt.
3. Place the new drive belt over the
small pully.
4. Position part of the drive belt over
the large belt pulley as shown.
5. Rotate the large pulley by hand in
a clockwise direction whilst
guiding the belt on to the large
pulley.
Summary of Contents for RACER 9/100P
Page 24: ......