background image

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply
through an approved 13 amp BS 1363 plug, or a suitably fused isolator
switch.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT:

 The wires in the mains lead are coloured in accordance

with the following code:

Green & Yellow

-

Earth

Blue

-

Neutral

Brown

-

Live

As the colours of the flexible lead of this appliance may not correspond
with the coloured markings identifying terminals in your plug proceed as
follows:

Connect GREEN & YELLOW cord to terminal marked with a letter “E”
or  Earth symbol “    ” or coloured GREEN or GREEN & YELLOW.

Connect BROWN cord to terminal marked with a letter “L” or
coloured RED.

Connect BLUE cord to terminal marked with a letter “N” or coloured
BLACK.

If this appliance is fitted with a plug which is moulded onto the electric
cable (i.e. non-rewireable) please note:

1.

The plug must be thrown away if it is cut from the electric cable.
There is a danger of electric shock if it is subsequently inserted into a
socket outlet.

2.

Never use the plug without the fuse cover fitted.

3.

When replacing a detachable fuse carrier, ensure the correct
replacement is used (as indicated by marking or colour code).

4.

Replacement fuse covers can be obtained from your local dealer
or most electrical stockists.

FUSE RATING

The fuse in the plug must be replaced with one of the same rating

 (13

amps)

 and this replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains
supply via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any
repairs yourself.

6

PARTS LIST

1

Hex Skt Hd Bolt M6x55 4 HTRANG001

2

Spring Washer

4 HTRANG002

3

Elbow Exhaust

1 HTRANG003

4

Cylinder Head

1 HTRANG004

5

Air Filter

1 HTRANG005

6

Gasket

1 HTRANG006

7

Valve Assembly

2 HTRANG007

8

Valve

2 HTRANG008

9

Gasket

1 HTRANG009

10

Cylinder Gasket

1 HTRANG010

11

Cylinder

1 HTRANG011

12

Cylinder Gasket

1 HTRANG012

13

Bolt M8x25

2 HTRANG013

14

Spring Washer

2 HTRANG014

15

Gas Ring

2 HTRANG015

16

Oil Ring

1 HTRANG016

17

Piston

1 HTRANG017

18

Wrist Pin  12x37.5

1 HTRANG018

19

Elastic Collar

2 HTRANG019

20

Connecting Rod

1 HTRANG020

21

Bolt M8x22 - lh

1 HTRANG021

22

Crank Shaft

1 HTRANG022

23

Nut 3/4-16unf

2 HTRANG023

24

Exhaust Pipe

1 HTRANG024

25

Cooling Fin

1 HTRANG025

26

Oil Sight Glass G1/2

1 HTRANG026

27

Oil Sight Glass Ring

1 HTRANG027

28

Front Cap

1 HTRANG028

29

Bolt  M6x16

4 HTRANG029

30

Breather

1 HTRANG030

31

Gasket

1 HTRANG031

32

Shaft Seal

1 HTRANG032

33

Nut M8

7 HTRANG033

34

Washer

1 HTRANG034

35

Crankcase

1 HTRANG035

36

Bearing

1 HTRANG036

37

Bolt M8x40

4 HTRANG037

38

Spring Washer

4 HTRANG038

39

Washer

4 HTRANG039

40

Rotor

1 HTRANG040

41

Bearing

1 HTRANG041

42

Stator

1 HTRANG042

43

Fan

1 HTRANG043

44

Rear Cap

1 HTRANG044

45

Washer

1 HTRANG045

46

Washer

1 HTRANG046

47

Hex Skt Hd Bolt M5x15 6 HTRANG047

48

Washer

6 HTRANG048

49

Cowl

1 HTRANG049

50

Hex Skt Hd Bolt M3x6

2 HTRANG050

51

Spring Washer 3

2 HTRANG051

52

Washer

2 HTRANG052

53

Capacitor 35uf

1 HTRANG053

54

Spring Washer

4 HTRANG054

55

Bolt M5x115

4 HTRANG055

56

Air Tap

1 HTRANG056

57

Regulator

1 HTRANG057

58

Pressure Switch

1 HTRANG058

59

Safety Valve

1 HTRANG059

60

Nut

1 HTRANG060

61

Connector

1 HTRANG061

62

Gasket

1 HTRANG062

63

Connector

1 HTRANG063

64

Tank Press. Gauge

1 HTRANG064

65

Outlet Press. Gauge

1 HTRANG065

66

Nut M1

1 HTRANG066

67

Delivery Pipe

1 HTRANG067

68

Electric Cable

1 HTRANG068

69

Cable Conn. (u)

2 HTRANG069

70

Cable Conn. (o)

1 HTRANG070

71

Power Lead

1 HTRANG071

72

Tank 24 Litre (RANG45) 1 HTRANG072

72

Tank 50 Litre (RANG65) 1 HTRANG072a

73

Handle

1 HTRANG073

74

Small Elbow

1 HTRANG074

75

Check Valve

1 HTRANG075

76

Drain Valve

1 HTRANG076

77

Cushion Foot

2 HTRANG077

78

Bolt M8x20

2 HTRANG078

79

Roller Shaft Bolt

2 HTRANG079

80

Wheel

2 HTRANG080

81

Spring Washer

2 HTRANG081

82

Nut M10

2 HTRANG082

83

Casing  Cap

2 HTRANG083

84

Thermal Overload

1 HTRANG084

85

Air Filter Element

1 HTRANG085

86

Reset Button

1 HTRANG086

 

No. Description

Qty Part No.

 No. Description

Qty Part No.

11

Summary of Contents for RANGER 45









Reviews: