Clarke SL-2C, User Instructions

7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SETTING UP AS AN A-FRAME STEP LADDER (3)

1. To create a step ladder engage 

the two sections at the top and tilt 
to create the steps.

2. Fit the bracing pieces shown in Fig 

5 and ensure the locking clips are 
connected to the ladder uprights 
as shown.

3. When using the ladder, 

ALWAYS

make a visual check that 

ALL

parts have latched into the 
locked position.

FITTING THE PLATFORM (2/4)

1. Fit the platform across the two 

upright sections, then fit the 
bracing pieces to the platform as 
shown.

2. Connect the locking clips to the 

ladder uprights as shown in Fig 5.

3. When working on stairs as in Fig 2 

(item 4), re-fit one upright section 
to suit the height of the stairs 
before securing the bracing 
pieces.

4. When using the platform 

ALWAYS

 make a visual check that 

ALL

 parts have 

latched securely into position.

STORAGE AND TRANSPORT

When storing or transporting the ladder, engage the latch shown in Fig 3 to 
hold the two ladder sections together.