TO LOWER A LOAD
With the supports removed, check to ensure that there are no personnel in the immediate
vicinity before removing the handle from its housing, and replacing it again over the pegs
on the release valve (B, fig,1)
IMPORTANT! VERY SLOWLY turn the handle anticlockwise to open the release valve, and
allow the jack to lower the load, UNDER COMPLETE CONTROL.. NEVER, under any
circumstances, jerk the valve open
MAINTENANCE
Inspect for Hydraulic leaks, and security of the lifting head. Keep all parts of the jack well
lubricated to prevent any possibility of corrosion. Store the jack in a dry place where it
cannot be attacked by the elements. Store in its fully retracted position.
If stored for long periods, inspect at least twice a year; clean, and re-oil. For servicing,
contact your CLARKE dealer, or CLARKE Service dept..
SPECIFICATIONS
SPARE PARTS
For Spare Parts and Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
Remember..NEVER allow any individual to get beneath the load until it is firmly chocked or
supported on axle stands or similar supports.
Model No.
CBJ2 CBJ4 CBJ6 CBJ8
CBJ10 CBJ12 CBJ20
Capacity*
2
4
6
8
10
12
20
Min Ht**(A)
155
190
195
200
200
210
240
Max Ht**(D)
295
385
405
415
420
435
490
Pump Ht**(B)
78
135
130
135
140
145
165
Screw Ht**(C)
62
60
80
80
80
80
85
Weight (kg)
3.0
3.8
5.5
6.2
6.9
8.0
14
*Capacity in Tonnes
**All measurements in mm
Summary of Contents for STRONG-ARM CBJ2
Page 4: ...Declaration Of Conformity...
