background image

2

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE Tractor Jack.

Before attempting to operate the product, it is essential that you read this 
manual thoroughly and carefully follow all instructions given. In doing so you 
will ensure the safety of yourself and that of others around you, and you can 
also look forward to the press giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 
12 months from the date of purchase. Please keep your receipt as proof of 
purchase.

This guarantee is invalid if the product is found to have been abused or 
tampered with in any way, or not used for the purpose for which it was 
intended.

Faulty goods should be returned to their place of purchase, no product can 
be returned to us without prior permission.

This guarantee does not effect your statutory rights.

TECHNICAL SPECIFICATIONS

Working Height A

Min 63 mm
Max 450 mm

FIG 1

Maximum Load A

4000 kg

Working Height B

Min 407 mm
Max 720 mm

Maximum Load B

5000 kg

Overall Length (C 
Max)

676 mm

Weight

41 kg (18.5 lbs)

Summary of Contents for Strong-Arm CFT5









Reviews: