For Spare Parts and Servicing, please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
PROBLEM
PROBABLE CAUSE
REMEDY
Jack will not lift
Oil level low
Top up oil
to full height
Jack will not hold .
1 Release valve not closing
1 Turn handle fully clockwise
the load
2 Pump valves not seating
2 Consult your CLARKE dealer
3 Air in ram
3 Purge air (see below)
Arm will not lower
1 Broken return Spring
1 Replace (See your dealer)
2 Lift arm linkage bent or
2 Consult your CLARKE dealer
binding
3 Cylinder ram binding
3 Consult your CLARKE dealer
4 Parts Worn
4 Consult your CLARKE dealer
Jack feels spongy when
Air in system
Purge air (see System Air Purge)
lifting
SPECIFICATIONS
Maximum load (tonnes) ................................................................. 2
Min. Saddle Height (mm) ............................................................ 125
Maximum Height (mm) ............................................................... 800
Overall Length (mm) ................................................................. 1190
Overall Width (mm) ..................................................................... 435
Weight (kg/lbs) ................................................................. 57.5/126.5
Part No. ................................................................................. 7621025
SPARE PARTS
The following user serviceable parts are available from your Clarke dealer, or Clarke
International Parts Dept.
1.
Saddle
2.
Castor Assembly
3.
Front Wheel Assembly
4.
Handle Assembly complete
5.
Foot Pedal
FAULT FINDING
