ENGLISH
4
Operator’s Manual - Vantage 13
WARNING!
Before using the machine, close all doors and/or covers.
–
The machine power supply cable is grounded and the relevant plug is grounded too. In case of machine
–
malfunction or breakdown, grounding connection reduces the risk of electric shock.
The power supply cable plug must be connected to an appropriate outlet, which is grounded according to
–
law in force.
Improper connection can cause electric shock. Consult a quali
fi
ed technician to make sure that the outlet is
–
properly grounded.
Do not modify the plug of the machine. If the power supply cable plug cannot be connected to the outlet,
–
have new grounded outlet installed by a quali
fi
ed technician, according to the law in force (local code).
Before connecting the power supply cable to the electrical mains, check that frequency and voltage, shown
–
on the machine serial number plate (1), match the electrical mains voltage.
Do not unplug the machine by pulling the supply cable. To unplug, grasp the plug, not the cable.
–
Do not handle the plug or the machine with wet hands.
–
Turn off all controls before unplugging.
–
Regularly check the power supply cable for damages, cracks and wear. If necessary, replace it.
–
If the power supply cable is damaged, it must be replaced by Clarke Service Center.
–
Do not pull or carry the machine by the supply cable; never use the power supply cable as a handle. Do not
–
close a door on the supply cable, or pull the supply cable around sharp edges or corners. Do not run the
machine on the supply cable.
The brushes must not come into contact with the power supply cable.
–
Keep the supply cable away from heated surfaces.
–
To reduce the risk of
fi
re, electric shock, or injury, do not leave the machine unattended when it is plugged
–
in. Unplug the machine from the electrical mains when not in use and before servicing.
Always protect the machine against the sun, rain and bad weather, both under operation and inactivity
–
condition. Store the machine indoors, in a dry place: This machine must be used in dry conditions, it must
not be used or kept outdoors in wet conditions.
Do not allow to be used as a toy. Close attention is necessary when used near children.
–
Use only as shown in this Manual. Use only Clarke’s recommended accessories.
–
Take all necessary precautions to prevent hair, jewelry and loose clothes from being caught by the machine
–
moving parts.
Do not use the machine on incline.
–
Do not use the machine in particularly dusty areas.
–
While using this machine, take care not to cause harm to people or damage to objects.
–
Do not bump into furniture, shelves or scaffoldings, especially where there is a risk of falling objects.
–
Do not put any can containing
fl
uids on the machine.
–
The machine working temperature must be between 0°C and +40°C.
–
The machine storage temperature must be between 0°C and +40°C.
–
The humidity must be between 30% and 95%.
–
Summary of Contents for Vantage 13
