8
INSTALLING THE BACKSTOP
1. Position the backstop against the
belt frame so that the slot aligns
with threaded hole in frame.
2. Secure the backstop to frame with
2 x socket head screws, washers as
shown. Do not overtighten.
• The gap between the sanding
belt and the backstop should
be no more than 2mm.
ATTACHING A DUST COLLECTION HOSE
This sander is equipped with a 2½" (60
mm) diameter dust port that can be
connected to a vacuum or dust-
collection system.
1. Place a 2½” ID diameter hose over
the dust port.
Secure hose in place with a hose
clamp.
