-8-
-3-
SAFETY PRECAUTIONS
WARNING:
As with all machinery, there are certain hazards involved with their operation
and use. Exercising respect and caution will considerably lessen the risk of
personal injury. However, if normal safety precautions are overlooked or
ignored, personal injury to the operator or damage to property, may result.
1.
ALWAYS
Learn the machines’ applications, limitations and the specific potential hazards
peculiar to it. Read and become familiar with the entire operating
manual.
2.
ALWAYS
use a face or dust mask if operation is particularly
dusty.
3.
ALWAYS
check for damage. Before using the machine, any damaged
part, should be checked to ensure that it will operate properly, and
perform its intended function.
Check for alignment of moving parts, breakage of parts, mountings, and any other
condition that may affect the machines’ operation. Any damage should be properly
repaired or the part replaced. If in doubt,
DO NOT
use the machine. Consult your
local dealer.
4.
ALWAYS
disconnect the tool/machine from the power supply before servicing and when
changing accessories.
5.
ALWAYS
wear safety goggles, manufactured to the latest European Safety Standards.
Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.
6.
ALWAYS
keep work area clean. Cluttered areas and benches
invite accidents.
7.
ALWAYS
ensure that adequate lighting is available. A minimum
intensity of 300 lux should be provided. Ensure that lighting is
placed so that you will not be working in your own shadow.
8.
ALWAYS
keep children away. All visitors should be kept a safe distance from the work
area, especially whilst operating the machine.
9.
ALWAYS
maintain machine in top condition. Keep tools/machines
clean for the best and safest performance. Follow maintenance
instructions.
10.
ALWAYS
handle with extreme care do not carry the tool/machine
by its’ electric cable, or yank the cable to disconnect it from the
power supply .
11.
ALWAYS
ensure the switch is off before plugging in to mains. Avoid accidental starting.
12.
ALWAYS
concentrate on the job in hand, no matter how
trivial it may seem. Be aware that accidents are caused
by carelessness due to familiarity.
13.
ALWAYS
keep your proper footing and balance at all times
don’t overreach. For best footing, wear rubber soled
footwear. keep floor clear of oil, scrap wood, etc.
Parts Diagram
