Clarke X-Pro CAT163, Operating & Maintenance Instructions

7

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

BEFORE USE

1. Fit the handle as shown using the 

bolts provided.

• A hex key is supplied for this 

purpose.

2. Remove the protective plug from 

the air inlet port and connect a 
suitable hose as shown.

3. Connect the other end of the hose 

to the compressed air supply.

4. Turn on the air supply and check 

for air leaks. Rectify any found 
before proceeding.

• PTFE tape may be useful for 

sealing threaded connections.

5. If required, connect an in-line mini oiler to the tool.

• A mini oiler helps to prolong the life of the air tool.

6. If a mini-oiler is not being used, run a few drops of oil through the tool 

before use. It can be entered through the airline inlet or via the hose at the 
nearest connection to the air supply.

7. A gauze filter is fitted within the air inlet. Ensure this filter is always in place 

and is kept clean. An air line is connected to the adapter, preferably via a 
quick release coupling (not supplied).

8. Ensure the trigger is NOT depressed when connecting the air line.

• Your air tool is now ready for use

• You can fit a whip hose with a quick fit coupling if required 

(available from your Clarke dealer.)