Page 16
SPECIFICATIONS
ELECTRICAL
Input
Voltage
120VAC 85VAC to 155VAC (without Battery discharge)
Frequency
45Hz to 65Hz
Output
Voltage/Max Current
Max Rated Power..
875W Total
120 VAC +3% 7.3 Amps
48 VDC +3% 8 Amps
24 VDC +3% 6 Amps
12 VDC+3% 6 Amps
Frequency
50Hz or 60Hz +.25% (software selectable) for 120VAC Output
Crest Factor Ratio
(Non-linear load and
less than 5% THD) Typical
@50% Load Up to 4.8:1
@75% Load Up to 3.2:1
@100% Load Up to 2.4:1
Harmonic Distortion
3%
Dynamic Response
+4% for 100% Step Load Change, 0.5 Millisecond Recovery Time
Overload
110% for 10 min; 200% for 50 milliseconds
Efficiency (UPS)
Load Power Factor
85%
0.7
UPS Protection
Input and Output Short Circuit; Input and Output Overload;
Excessive Battery Discharge
MECHANICAL
Input (Qty)
(1) IEC Inlet C14
Output (Qty)
(3) 2 Position connector (12VDC, 24VDC and 48VDC)
(1) IEC Outlet C13 (120VAC)
Overall Dimensions W x D x H
16.74in x 12.38in x 1.7in
Weight
10 lbs.
Cooling
Low Velocity, Forced Air
CONTROLS AND INDICATORS
Visual Indicators
Battery Status, AC Output, Alarm, AC Input, DC Output
Controls
Load On/Off, Cold Start
Intelligent Computer Interface
(1) DB9-F
– RS232/Signal Interface
(1) USB Type B
DESIGN
Standard Features
Regenerative On-Line, Sinewave Inverter Powers Load Continuously
Extended Brownout Protection, External Battery Connector, Digitally
Controlled IGBT PWM, Power Factor Corrected on Input, Designed for
Non-linear Loads
ENVIRONMENTAL
Operating Temperature
-40
o
F to 165
o
F (-40
o
C to 74
o
C)
Humidity
0% to 95% non-condensing
Altitude
Sea Level to 10,000 Feet
