T H E C O N T I N U O U S P O W E R C O M P A N Y
Page 17
2.2
SPECIFICATIONS
The various specifications of the UPS system are provided in the following tables.
Table 3: ELECTRICAL SPECIFICATIONS
Electrical Specifications
Input Specification
Nominal Input Voltage
120 VAC, Single Phase
Input Voltage Range
85 VAC to 135 VAC
Input Frequency
50 or 60 Hz (+/- 5%)
Input Configuration
3 Wire (Hot, Neutral & Ground)
Input Current (Max. draw)
14.3 amps, Power-Factor Corrected
Input Protection
Input Fuse (25 amps)
Output Specification
Nominal Output Voltage
120 VAC, Single Phase
Power Rating
2 kVA (2000VA/1400W), 16.7Amps
Output Voltage Regulation
+/- 2% for 100% step load change and from
High battery to Low battery condition
Output Frequency
50 or 60 Hz (+/- .5%) unit not in sync.
Output Configuration
Keyed, circular connectors and duplex Receptacle.
Output Wave Form
True Sine wave
Overload capability
110% for 10 minutes 200% for ½ second
Fault clearing
Current limit and automatic shutdown
Short circuit protection
Current limit and automatic shutdown
Efficiency
90% at full load (on utility)
Load Power Factor
.7 lagging through unity to .7 leading