3
E
nglish
• Keep the product clean. Make sure that no foreign objects can enter the ventilation openings as
this can present a risk of electric shock or fire.
• Children in the area where the product is used must be kept under supervision.
• The product must only be connected to an electrical outlet with a 230 V, 50 Hz power supply.
• The product must not be placed directly below a wall socket.
• The product must not be placed on or next to a stove, cooker hob or heat source.
• Do not leave the product switched on unattended overnight.
• Before connecting the product to the mains, make sure that it is turned off and that your hands
are completely dry.
• Do not use extension leads for this product. Connect it directly to a mains outlet.
• The product is intended for indoor use only.
• The product must not be taken apart or modified. Certain uninsulated components inside
the housing carry dangerous voltages. Contact with these can lead to fire or electric shock.
• The mains lead must be changed if damaged. This is to prevent the risk of electric shock or fire and
should only be carried out by the manufacturer, a qualified service facility or qualified technician.
• Make sure to route the mains lead behind the product so that it is not heated by the hot air from
the product.
• Never use water or a wet cloth to clean the housing of the product, doing so will pose a risk of
electric shock or short-circuiting.
• The product must not be used in humid environments.
• Always let the product cool down before moving it.
• The product may not be controlled by an external timer or any type of remote control.
Product description
4
1
2
3
1. Air outlet
2. Air inlet
3. Control panel
4. Foldout legs
10 11
9
8
7
6
5
Control panel
5. [
Ι
] Cool Air
6. Thermostat knob
7. [
ΙΙ
] Warm Air 900 W
8. [
ΙΙΙ
]
Warm Air 1800 W
9. Indicator light
10. [ l ] On
11. [ 0 ] Off: When the button is pressed in, the indicator light (9)
flashes and the fan heater enters Cool Air mode for 30 seconds
(if one of the warm air modes is selected) in order to cool down
the fan heater (Cool Down mode). This reduces the risk of
the someone burning themselves on the fan heater.
