10
English
1. Slide the motor unit into the shoe until it clicks into place.
2. Carefully push the motor unit and shoe assembly onto the end of the telescopic handle until a click
is heard. Connect the power cable to transfer control from the shears to the telescopic handle.
3. Pressing in the release button on the wheel carriage will release the shears from
the telescopic handle.
Instructions for use
Warning:
• Always keep the work area tidy so you can move freely without the risk of tripping over obstacles.
• Make sure that there are no foreign objects or loose branches which could become caught in
the blades of the shears.
• Make sure that you are wearing all required safety gear before starting.
• Make sure that all parts of the shears are intact, accounted for and undamaged.
• Make sure that the blades are sharp and lubricated.
• Make sure that the safety lock button (4) and power trigger (5) are easily depressed and do
not stick or function abnormally in any way.
• Ensure that the handle is clean and easily gripped.
Take the following points into consideration when using
the shears
• Make sure that there are no hidden obstacles (metal poles/wire fences) in the area to be trimmed.
• Max branch diam: 8 mm.
• Hold the shears firmly; maintain a steady stance and do not lean out too far. Be extra careful
when using a ladder.
• Move the shears along in a slow and steady motion.
• The double-sided blade enables cutting in both directions or in a pendulum action from side
to side.
• For even trimming on the sides it is better to cut in the direction of growth, from the bottom up.
