English
GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799
internet:
www.clasohlson.com/uk
customerservice@clasohlson.co.uk
V
er
. 20
130927
Extension Cord USB 2.0
Art.no 38-1413 Model 2180-4313
Please read the entire instruction manual before use and save it for future reference.
We reserve the right for any errors in text or images and for making any necessary
technical changes to this document. If you should have any questions concerning
technical problems please contact our Customer Services.
• 4-pin USB 2.0 extension lead with built-in amplifier.
• Type A to A (male to female).
• Length: 5 metres
Installation
• Connect the extension cord to a vacant USB port, the driver is already in
the operating system (valid for Windows 8 (32-bit/64-bit), Windows 7 (32-bit/64-bit),
Vista (32-bit/64-bit) and XP).
• The extension cord should ideally be connected to a USB port on the
motherboard, but if only one lead is being used, it may be connected to
an external/internal USB hub.
• For serial connections, where several extension leads are connected together,
a motherboard USB connection must be used.
Note
• Serial connections reduce the data transfer rate for every added extension lead
respectively.
• The extension lead is of type USB 2.0 and is capable of high data transfer rates.
However your motherboard must support the USB 2.0 protocol or the transfer
rate will occur at the lower USB 1.1 transfer rate.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
