Clas Ohlson 30-6215, Manual

E

N

G

LI

S

H

Air Hammer 30 - 6215

Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our 
Customer Service Department (see address on reverse.)

Description

The air hammer is designed for a multiple of uses on varying materials e.g. 
cutting through rusty steel or bolts and removing grout from cement blocks or 
bricks. It is equipped with a control valve for carrying out precision work and 
suitable for tools with a 10 mm hexagonal shank. Air connection: R ¼˝, quick 
connector nipple.

Acceptance of Delivery

Check immediately if the goods are damaged after delivery.  See also our 
Terms and Conditions in our main catalogue.

Safety guidelines 

Always follow these safety guidelines and other relevant safety rules.
1.  Read through all manuals that accompany this product. Learn how all 

the controls operate and how to properly handle the tool.

.  Only persons with good knowledge of the safety guidelines and proper 

handling of this tool should operate it.

3.  Do not wear any loose fitting clothes, ties or jewellery when you are 

working with the air hammer. Loose fitting clothes and jewellery can get 
caught in the moving parts and cause severe bodily injury.

4.  Do not hold down the trigger when you connect the tool to the 

compressed air hose. 

5.  Never hold the trigger before putting the hammer against a workpiece. 

All chisels must be securely fastened. Loose sitting chisels can cause 
severe injuries. 

6.  Never aim the air hammer at yourself or any other person. There is a 

major risk for injury.