F
11. Adjust the support rollers to the same height as the saw bench. Tighten the screw knobs.
12. Remove the saw and fold up the saw bench after use.
Mounting a saw with mounting holes that are not parallel
Certain saws have 3 mounting holes or another pattern of holes making them difficult to attach using
the mounting brackets.
A piece of plywood 15–20 mm thick can be used as an adapter between the saw and saw bench.
Method I
If the lateral distance between the mounting holes at the front and back is only a few centimetres different,
the mounting brackets can be adjusted so that they are at a slight angle.
1. The mounting brackets have an adjusting screw with a locking nut (F) in the opening underneath.
Hook the front first
Press the back down
Turn the handle down to
lock the bracket in place
10. Mount the saw and mounting brackets onto the saw bench. Hook the front first, then press
the back down. Turn the handle down to lock the bracket and the saw in place.
1
2
3
6
English
