5
English
Buttons and functions
The power switch has 4 positions:
0
Off
Fan only (cold air)
Warm air (650 W)
Hot air (1000 W)
Operation
Plug the heater into the power socket located in the cabin of the vehicle. The outlet
socket inside the car should be connected to the power inlet socket on the outside of
the vehicle via a permanently installed cable. The cable must be rubber-coated with a core
area of at least 1.5 mm² (H05RN-F) and encased in a flexible metal armour sheath.
Installation
The car heater comes with a bracket designed for attaching it in various places
depending on the design of your vehicle. The car heater can also be placed on
the floor of your vehicle using the foot stand if there is enough room.
Make sure that the air leaving the heater is not
directed down towards the floor or under
the passenger seat.
If possible, position the heater in such a way that
the air passes over the passenger seat.
For maximum efficiency
