12
EN
G
LI
SH
1
2
4
5
6
7
8
9
10 11
12
1
14
15
4. Functions Controls
The Display
1. Timer 0 - 99 minutes
2. Speed in km/h
. RPM
4. Distance in km
5. Energy consumption
in kcal
6. Digital display of Watts
7. Current user
8. Start/Stop mode
9. Selected program
10. Tension level setting
11. Pulse rate
12. Start programming
1. Activate the pulse
recovery function
14. Confirm programming
15. Change value-up/value
down by turning the knob.
Press the knob for Start/
Stop.
5. Use
Power Supply
Connect the DC plug from the supplied AC/DC adaptor (6 V, 1,000 mA, + in centre) to the outlet on the back
side of the rear foot (81). Connect the adaptor to a wall socket.
Turn on the display
Press any of the buttons or start pedalling to activate the display. Underneath PROGRAM the number 1 will
flash for
Program 1 MANUAL
. Check that the AC/DC adaptor is correctly connected if the display is not
working .
Moving the Cross Trainer
Grip the fixed handlebar and lift the
rear foot off the ground so that the
wheels on the front can rotate.