7
EN
G
LIS
H
32
36
86
80
12
13A
28
26
79
13
86
33
81
34
35
32
36
86
80
12
13A
28
26
79
13
86
33
81
34
35
Step 1
1. Attach the front foot (2) and rear foot (81) to the base frame using two bolts (), washers (4) and cap
nuts (5) on each foot.
2. If the floor is uneven, the rear foot (81) has an individual height adjuster on both sides.
. The front foot (2) has transportation wheels, which need to face towards the front of the Cross Trainer.
Step 2
1. Fit the plastic collar (79) over the handlebar post
and then pass the computer cable (1A) up from
the base frame and connect it to the computer
cable (1) in the handlebar post.
2. First unscrew the pre-assembled bolts and then
secure the handlebar post (12) to the base frame
(86) using four M8x20 bolts (28) and four wash-
ers (26).
