8
EN
G
LI
SH
6A
16
17
19
18
25
24
12
43
6B
22
21
23
19
Step 3
1. Unscrew the pre-assembled screws (21) and then pass the axle (25) through the holes at the top of the
lower half of the moveable handlebars (19) and the handlebar post (12) as shown. Remember the wash-
ers (24) between the post and the handlebars. Secure the axle using the screws (21), wave washers (24),
washers (22) and the plastic washers (2).
2. Attach the lower moveable handlebar (19) to the U-bracket of the pedal arm (4). Secure it using the bolts
(42), washers (0) and nuts (40).
. Attach the upper halves of the moveable handlebars (6A & 6B) to the lower halves (19) using the bolts
(18), washers (17) and cap nuts (16).
