E
N
G
LI
S
H
Setting time and date
1. Press and hold
SET (4)
for approx. 3 seconds until the day of the week flashes in the
display. Use the
+ button (2)
and
- button (3)
to change the day.
2. Press
SET
once more, causing the hour display to flash. Set the hours using the
+
and
-
buttons.
3. Press
SET
once more, causing the minutes display to flash. Set the minutes using
the
+
and
-
buttons.
4. Push
SET
to confirm and save. If no button is pressed within 30 seconds the unit
returns to normal mode again.
Setting the temperature range
The temperature range included in the temperature setting determines when the
thermostat activates or deactivates the air conditioning system.
1. Push and hold
TEMP
(6) for 3 seconds. SP 0, 1, 2 or 3 will be appear on the display.
2. Push
+
and
-
to choose between the following temperature ranges:
•
SP 0
= + 0.3 to - 0.3
0.6 °C in total
•
SP 1
= + 0.5 to - 0.5
1.0 °C in total
•
SP 2
= + 1.0 to - 1.0
2.0 °C in total
•
SP 3
= + 2.0 to - 2.0
4.0 °C in total
3. Push
OK (8)
to confirm and save. If no button is pressed within 30 seconds the unit returns to normal mode again.
