10
E
N
G
L
IS
H
A:
Network Type:
Select
Infrastructure
if you are connecting to an existing network.
Select
AD-Hoc
for a Peer-to-Peer (P2P) connection.
B:
SSID
All wireless devices must use the same SSID (network name) in order
to communicate.
C: Channel
(in Ad-Hoc mode) chooses a desired value.
D:
Security:
There are 4 different settings for
Wireless
security
.
•
Disable
(off) No encryption.
•
WEP
with 802.11b standard. Data encryption before transmitting, but
simplistic encryption. 10 respective 26 letter keys are required for 64 bit or
128 bit WEP encryption.
•
WPA-PSK
Data is encrypted with Wi-Fi protected access, and is much
safer than WEP. Two methods are possible: TKIP and AES, PSK must be
between 8 and 63 characters.
•
WPA2
This is a further development of WPA-PSK, and gives an even
higher degree of security, PSK must be between 8 and 63 characters.
8. Click
Next
to continue to the IP settings.
• Mark
Obtain IP Address automatically
if the network has a DHCP Server,
otherwise you must choose
Use following IP address.
• If you mark
Use following IP address
then you must enter an IP number
that is available on the network.
• Use the same settings for the
Subnet Mask
and
Default Gateway
as
used for the computers on the network.
9. Click
Next
to come to
the next dialogue box.
Summary of Contents for 38-2945
Page 2: ......
