6
English
• Use only lamination film. Never try to feed in any other type of material.
• If you intend to laminate a series of items in one session, let the machine rest for at
least 15 seconds between every lamination.
• Do not Hot laminate any material that is sensitive to heat.
N.B:
The laminator is intended for personal use only and should not be used continuously.
We recommend that you turn off the machine and let it cool for 30 minutes after 2 hours
of use.
Reverse feature for correcting misfeeds
The machine has a feature which allows the laminate to be pulled out from the front.
If the lamination film misfeeds or jams:
1. Turn off the laminator immediately by turning the power switch to
0
and then unplug
it from the wall socket.
2. Hold in the [
ABS
] button and extract the laminate.
Care and maintenance
Unplug the product before cleaning it using a moist cloth. Use only mild cleaning agents,
never solvents or corrosive chemicals.
Responsible disposal
This symbol indicates that the product should not be disposed of with
general household waste. This applies throughout the entire EU. In order
to prevent any harm to the environment or health hazards caused by
incorrect waste disposal, the product must be handed in for recycling
so that the material can be disposed of in a responsible manner. When
recycling your product, take it to your local collection facility or contact
the place of purchase. They will ensure that the product is disposed of in
an environmentally sound manner.
Specifications
44-4481
Rated voltage
220–240 V AC, 50 Hz
Laminate
Max lamination width: 330 mm
Recommended lamination film thickness:
80–125 microns
Speed 300 mm/min
Warm-up time
Approx. 5–7 mins
Dimensions
488 × 260 × 98 mm
44-4480
Rated voltage
220–240 V AC, 50 Hz
Laminate
Max lamination width: 240 mm
Recommended lamination film thickness:
80–125 microns
Speed 300 mm/min
Warm-up time
Approx. 5–7 mins
Dimensions
390 × 175 × 86 mm
