5
English
7. Stick a piece of masking tape onto
the side of the shelf unit and mark
where the mounting screws will be.
8. Fold out the drop down table, hold the shelf unit against the wall in the correct
position and level for marking the mounting holes. Use a spirit level on the table
and the shelves.
9. Using the marks on the tape, mark out
the position of the holes for the mounting
screws (58 cm centre-to-centre). Use
the included screws and wall plugs or another
fastening method more appropriate for
the material the desk is to be attached to.
Note:
Before drilling mounting holes into
the wall, make sure that it is free from hidden
electrical wiring and water pipes.
10. Screw the hanging screws into the wall.
Make sure to leave enough protruding
to hang the desk on.