E
N
G
LI
S
H
Care and maintenance
• Disconnect the tool from the air supply and empty the magazine completely before
beginning any service or repairs.
• Heed all the warnings in this manual and on the tool.
• Be extra vigilant when checking faulty tools.
• Do not use any modified parts or parts that do not have the same rating as the
original parts.
• When repairing the tool, make sure that the internal parts are clean and oiled. Apply
O-Lube lubricant or the equivalent to all o-rings. Rub a little O-Lube on all the
o-rings before assembly. Apply a little oil to all the moving parts and pivoting points.
After assembly, drop a couple of drops of oil into the coupling before testing the tool.
Lubrication
For best results, lubricate regularly but sparingly. Oil entering the air-lines will lubricate
the internal components.
Do not use flushing oil or additives because such lubricants wear out the seals and o-
rings, reducing the power output and creating the need for more maintenance.
If an oiler is not connected to the air supply, apply a few drops of oil to the air inlet nip-
ple once or twice a day. Only a few drops of oil are needed (3 – 5 drops) a time.
If too much oil is used it will just gather in the air line and appear when air is released.
Technical data
Model:
BN1850/SB1840
Weight (excluding nails):
1.15 kg
Air coupling:
Quick connector
Max air pressure:
7 bar
Recommended air pressure:
4-7 bar
Fasteners BN1850:
T-brad 18, 15-50 mm
SB1840:
T-brad 18, 15-40 mm & Type 90 Staple, 15-38 mm
Vibration:
1.9 m/s²
Sound level BN1850:
LpA=81dB(A), LwA=94 dB(A)
SB1840:
LpA=82dB(A), LwA=95dB(A)
Magazine capacity:
100
Disposal
Follow local ordinances when disposing of this product. If you are unsure about how to
dispose of this product contact your municipality.
Summary of Contents for Besco BN1850
Page 35: ...35...
