5
English
Operating instructions
Before initial use
• Wash the glass carafe and permanent filter before using the coffee maker for
the first time.
• Before using the coffee maker for the first time you should run the machine through
two to three filtration cycles with the water reservoir filled up to the 5-coffee cup
mark and without coffee grounds. This should also be done when the coffee
maker has not been used for a long time, and after descaling.
General
• The measuring scale on the water reservoir makes it easier for you to fill
the reservoir with the correct amount of water. Make sure not to exceed
the maximum water level.
• If you intend to brew several pots of coffee you should turn it off after every brewed
pot and let the machine rest for about 5 minutes between brews.
Brewing coffee
1. Open the lid and fill the water reservoir with the desired amount of water.
2. Insert the permanent filter into the filter holder.
3. Close the filter holder after filling with coffee and make sure that it is locked into
place.
4. Put the lid on the carafe and place the carafe onto the base. Make sure the carafe
lid is correctly in place to prevent the drip-stop mechanism on the filter assembly
from operating during brewing.
5. Plug the coffee maker into a convenient wall socket and switch it on using the on/off
switch on the coffee maker.
6. Wait until all the water has run through the filter before trying to remove the carafe
from the hotplate.
The coffee can be kept warm by leaving it on the hotplate. The hotplate will stay warm
until the machine is turned off. Always turn off the appliance after use and disconnect
the plug from the wall socket.
Care and maintenance
Cleaning
• Unplug the coffee maker and let it cool before cleaning it.
• Use a soft damp cloth to wipe the coffee maker clean.
• The glass carafe, carafe lid, filter holder and permanent filter can all be machine-washed.
