English
UNITED KINGDOM •
customer service
tel:
020 8247 9300
customerservice@clasohlson.co.uk
internet
www.clasohlson.co.uk
postal
10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
2
1
3
Ver
. 20180924
IP44 Plug-In Twilight
Switch with Timer
Art.no 36-1057
Model EMT446/MD
Please read the entire instruction manual before using the product and
then save it for future reference. We reserve the right for any errors in
text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our
Customer Services.
Safety
• Always unplug the twilight switch from the wall socket before
cleaning it.
• Make sure that the twilight switch is properly plugged into the wall
socket and that the connected load device/appliance is properly
plugged into the twilight switch.
• Keep the twilight switch out of children’s reach.
• Never connect a load device/appliance with a higher power rating
than 1000 W.
• Never immerse the twilight switch in water or other liquid.
• Never position the twilight switch where it may be splashed by water
or other liquid.
• Never try to open the housing, repair or modify the twilight switch in
any way.
• The twilight switch is not intended for permanent use, it is intended
for temporary use with Christmas decorations, string lights, etc.
• The twilight switch should only be used with one load device/appliance,
do not plug a splitter socket into the twilight switch and connect
multiple appliances.
• Make sure that the electrical socket that the product is plugged into
is easily accessible in case it and the connected product need to be
quickly disconnected from the mains electricity.
• Do not connect products of this type to each other.
• Do not cover the product.
Buttons and functions
Note:
• The twilight switch has a maximum load rating of 1000 W.
• Think carefully before positioning the twilight switch so that it is
not within the illumination zone of other light sources such as car
headlights.
1. Set the twilight switch to one of the settings described in
the table above.
2. Turn off the load device/appliance that you are going to connect to
the twilight switch.
3. Plug the load device/appliance into socket of the twilight switch.
4. Plug the twilight switch into an earthed wall socket.
5. Turn the load device/appliance on.
6. The load device/appliance will now be switched on/off in
accordance with the selected setting.
Care and maintenance
• Unplug the twilight switch from the wall socket before wiping it clean
with a dry cloth.
• Whenever it is not to be used for an extended period, the twilight
switch should be unplugged from the wall socket and stored in
a dry, dust-free environment, out of children’s reach.
Responsible disposal
1. Light sensor
2. LED indicator, lights when
the twilight switch is turned on.
3. Setting selector knob
Operating instructions
The various settings
OFF
Always off
ON
Always on
2Hrs
Switches on at dusk, switches off automatically after 2 hours
4Hrs
Switches on at dusk, switches off automatically after 4 hours
6Hrs
Switches on at dusk, switches off automatically after 6 hours
8Hrs
Switches on at dusk, switches off automatically after 8 hours
DUSK-
DAWN
Switches on at dusk, switches off at dawn
This symbol indicates that this product should not be
disposed of with general household waste. This applies
throughout the entire EU. In order to prevent any harm to
the environment or health hazards caused by incorrect
waste disposal, the product must be handed in for
recycling so that the material can be disposed of in
a responsible manner. When recycling your product, take
it to your local collection facility or contact the place of
purchase. They will ensure that the product is disposed
of in an environmentally sound manner.
Specifications
Rated voltage
230 V, 50 Hz
Max load
1000 W
Light sensor
5–75 lux
Temperature range
−10 to 55 °C
IP rating
IP44
