12
EN
G
LI
SH
4. Exercise Computer
ENTER
Used for selecting programmes,
confirming settings and selecting the
display mode (time, speed, distance, etc.).
5. Use
Power Supply
Connect the DC plug from the supplied AC/DC adaptor (6 V, 1,000 mA, + in centre) to the outlet on the back
side of the rear foot (81). Connect the adaptor to a wall socket.
Turn on the display
Press any of the buttons or start pedalling to activate the display. Underneath PROGRAM the number 1
will flash for
Program 1 MANUAL
. Check that the AC/DC adaptor is correctly connected if the display
is not working .
Moving the Cross Trainer
Grip the fixed handlebar and lift the
rear foot off the ground so that the
wheels on the front can rotate.
PULSE RECOVERY
Pushing this button starts the
fitness-test. The result is graded
from F1.0 to F6.0.
MEMORY
Stores the results from the Body
Fat test.
UP
Change setting/increase tension.
ST/SP
Start/Stop – pushing this
button starts or stops the
selected programme.
DOWN
Change setting/
reduce tension.
Username
Calories
Distance
Time
Speed
RPM
Watts
Pulse rate
Start/Stop
Summary of Contents for ER-6472C
Page 2: ......