English
GREAT BRITAIN • CUSTOMER SERVICE
tel: 08545 300 9799
internet:
www.clasohlson.com/uk
customerservice@clasohlson.co.uk
V
er
. 20
17021
6
Light Sensor
Art.no 36-5514 Model JY-0073A
Please read the entire instruction manual before using the product and save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
If you have any questions concerning technical problems please contact our Customer Services.
Description
Switches your light on automatically at dusk and off at dawn. Fits most light fittings with DIN connectors.
12–24 VAC/12–31 VDC. Max 3 A.
Operating instructions
This light sensor is intended for controlling lights fitted with DIN connectors and with wattages of up to
72 W operating on voltages of 12–24 VAC/12–31 VDC.
1. Connect the light sensor between the light fitting and its mains adaptor.
2. Screw the DIN connectors together tightly to make sure the joint is sealed.
3. Position the light sensor indoors by a window or outdoors in a location where it is sheltered from
rain and snow.
Note:
Bear in mind that light sources such as light bulbs and car headlights close to
the light sensor can cause the light sensor to activate the light fitting connected to it regardless of
the natural light conditions.
4. Try positioning the light sensor in different locations until it activates and deactivates the connected
light fitting as desired.
Care and maintenance
• Unplug the mains lead before cleaning the product.
• Clean the product using a soft, moist cloth. Use a mild detergent and never use solvents or strong,
abrasive cleaning agents for cleaning as these can damage the product.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Power supply
12–24 VAC/12–31 VDC
Power consumption
≤1 mA
Operating temperature
−25 °C to 55 °C
Max connected load
72 W (24V) / 36 W (12 V)
Max output current
3 A
Ingress protection
IP44
Light sensitivity
The output is activated (the light comes on) when the light level falls below 10 lux.
The output is deactivated (the light goes off) when the light level rises above 50 lux.
