16
EN
G
LI
SH
11. Setting the Clock
The clock has to be reset once the stereo has been disconnected from the mains.
N.B.
The clock can only be set when the stereo is turned off.
1. Make sure that the stereo is shut off.
2. Press
MEMORY/CLOCK
once. The display will show “SET CLOCK”.
. Press
I◄◄
or
►►I
to select a 12 or 24 hour clock display.
Example:
12 hour display chosen.
4. Press
MEMORY/CLOCK
again. The hour display will flash.
5. Set the clock using
I◄◄
or
►►I
and confirm with
MEMORY/CLOCK
, while the minute display flashes.
6. Set the clock using
I◄◄
or
►►I
and confirm with
MEMORY/CLOCK
.
AM/PM (only for the 12 hour clock display)
AM = Before noon, PM = Afternoon
12. Automatic Activation (timer)
Set the time for automatic activation/deactivation.
N.B.
• Make sure the clock is set before inputting new settings.
• The clock can only be set when the stereo is turned off.
1. Make sure that the stereo is shut off.
2. Press
TIMER
once.
is shown on the display.
. Press
FUNCTION
to select audio source, in other words the audio source
used when the stereo is activated.
4. Press
TIMER
again. Volume level will be shown in the display.
5. Adjust the volume with
VOLUME UP
or
VOLUME DN
.
