8
EN
G
LI
SH
5. Mounting
5.1 Wall mounting
The stereo can be used standing upright or be wall mounted according to your preference.
1. First remove the stand (which must be removed before mounting it to the wall).
a. Lay the stereo down according to the figure.
b. Use a Phillips screwdriver to remove the stand from the stereo’s underside.
c. Remove the stand by pulling it directly outward from the stereo. Keep the stand and screws for future use.
A
C
2. Connect the adaptor to the stereo’s DC connection (21).
. Measure the distance between the mounting holes on back of the stereo and use these
measurements to securely screw 4 screws into the wall.
N.B.
• Make sure that the wall and mounting fixings are enough to support the stereo’s weight.
• Incorrect mounting can damage the product or property and cause possible injury.
