5
English
Foot rest
1. Line the tubes on the foot rest up with
the pegs on the underside of the car.
Note:
Fit the foot rest the right way round
by passing the tube with a slot in it over
the peg with a spline (refer to the arrows
in the figure).
2. Fasten the foot rest in place
using the four included screws,
M5 × 52 mm.
Back rest
1. Stand the car on its wheels on a firm, flat surface.
2. Push the back rest down into the two holes at the rear of
the car.
Operating instructions
Motor propulsion
1. Set the control on the underside of
the car to
Battery-Powered
(10).
2. Fold down the foot rests.
3.
Move the gear stick (4) forwards to drive
forwards, backwards to drive backwards.
4. Release the gear stick or press [ STOP ]
(5) to stop the car.
Summary of Contents for Lightning McQueen
Page 2: ...2 ...
