English
GREAT BRITAIN • CUSTOMER SERVICE
tel
020 8247 9300
internet
www.clasohlson.co.uk
customerservice@clasohlson.co.uk
postal
10 – 13 Market Place, Kingston upon Thames, Surrey, KT1 1JZ
Ver
. 20180725
Pre-Lit Christmas Tree
Art.no 44-3313, 44-3315
Please read the entire instruction manual before using the product and then save it for future reference.
We reserve the right for any errors in text or images and any necessary changes made to technical data.
In the event of technical problems or other queries, please contact our Customer Services.
Safety
1. Open up the stand,
making sure that
the screws line up
with the holes in
the tree holder.
2. Insert the base of the tree into the holder and fasten it
using the screws.
3. The lights built-into the upper
and lower halves of the tree
need to be connected
together. Check where
the connector on the lower half
of the tree is located before
assembling the tree.
4. Fit the top half of the tree onto the lower half and
screw the lighting connectors together. Make sure that
the connectors are completely pushed together before
screwing down the lock nut.
5. Connect the mains adaptor to
the lights and then plug it into
an electrical socket.
Responsible disposal
This symbol indicates that this product
should not be disposed of with general
household waste. This applies throughout
the entire EU. In order to prevent any harm to
the environment or health hazards caused by
incorrect waste disposal, the product must
be handed in for recycling so that the material
can be disposed of in a responsible manner. When
recycling your product, take it to your local collection
facility or contact the place of purchase. They will ensure
that the product is disposed of in an environmentally
sound manner.
Specifications
44-3313 Christmas tree with lights
and cones
Mains adapter
Input
220–240 V AC, 50 Hz
Output
31 V DC, 0.12 A
Height
230 cm
300 LED lights
44-3315 Christmas tree with lights
Mains adapter
Input
220–240 V AC, 50 Hz
Output
31 V DC, 0.12 A
Height
250 cm
320 LED lights
For indoor use only.
Warning:
• The LED bulbs are not replaceable.
• Only connect the product to the included power supply
adapter.
• Never connect another type of product, or additional
string light, to the power supply adapter.
• The mains lead can not be replaced. If the cable is
damaged the product must be discarded
Assembly
