10
English
6. Scan negative or unframed slide in 135 format
(small image)
6.1 Basic setting when you start with the first image
Insert an SD memory card in the card reader (17). The memory card must be formatted
before you insert it.
1. Set both controls [ Film scanner - Photo scanner ] (9) and (15) to
Film scanner
.
2. Open the film holder (2) and place the film strip securely in the film holder (see below).
3. Guide the film holder into the feeder slot (18) with the white arrow first.
4. Switch on the scanner by pressing [
]; it will start after a few seconds.
5. “Capture” appears on the display.
6. Set which type of negative/slide is in
the film holder.
-
Press [
►
] to move to
Film
.
-
Press [ ENTER ] and define the correct
kind of image by pressing [
◄
] or [
►
].
Choose from:
Negatives Film
(negative
colour film) –
B&W
(black and white
negative/slide).
-
Press [ ENTER ] to confirm.
7. Guide the film holder into the feeder slot until the whole of the first image appears
in the display. Press [ SCAN ]; “Save” appears in the display. You can also select
Cancel
or
Home
. Change by pressing [
◄
] or [
►
].
8. Press [ ENTER ] to scan the image; this takes about one second (the hour glass
disappears when it’s done).
9. Push in the film holder so that the next image appears in the display.
Mirror
Flip
NB:
The image mode can be changed
before scanning by pressing [
◄
]
(mirror image).
Or press [
►
] (turn image upside down).
