English
GREAT BRITAIN • customer service tel: 0845 300 9799 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.com/uk
1
2
3
4
5
6
7
8
9
10
11
12
13
Ver
. 20140312
Wireless Stereo Headphones
with Microphone
Art.no 38-5590-1, -2, -3, -4
Model R
Please read the entire instruction manual before use and save it for
future reference. We reserve the right for any errors in text or images
and for making any necessary technical changes to this document.
If you should have any questions concerning technical problems please
contact our Customer Services.
Things to consider:
• Other wireless equipment using the same frequency band can
reduce the transmission range.
• The range of all wireless equipment depends on the type of
obstacles located between the transmitter and the receiver
(e.g. a concrete wall will interfere with the signal more than
a plasterboard wall).
If you experience problems, try the following:
• Turn off any other existing wireless equipment to check whether this
is the cause of the problem.
• Move any other existing wireless equipment. Shorten the distance
between the sending and receiving devices and reduce the number
of obstacles (walls, furniture, etc.) between them.
Safety
• Protect your hearing. Listening on high volume for prolonged
periods can lead to permanent hearing loss.
• Switch off the headphones in environments that may be affected by
the wireless transmission, e.g. hospitals or other health institutions.
• Do not use the headphones while driving.
• Do not let children play with the headphones.
• Never immerse the headphones in water.
• Never use the headphones if they are damaged or not working
properly.
Care and maintenance
Storage temperature: −15 to 55 ºC.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local authority.
Specifications
Bluetooth
V 3.0
Range
10–20 m in an open environment
Listening time
Approx. 20 hours
Standby time
325 hours
Charge time
3 hours
Battery
Lithium polymer
Frequency range
15 Hz – 22 kHz
Operating temperature
−10 to 50 ºC
Sensitivity
110 dB
Weight
283 g
Buttons and functions
Pairing the headphones with your mobile phone
1. Make sure that the devices are separated by no more than 1 metre.
2. Hold down the multi-function button for 8–10 seconds until
the headphones switch on and the LED indicator shows a steady
blue. This indicates that the headphones may be detected by other
Bluetooth devices.
3. Activate Bluetooth on the mobile phone that is to be paired with
the headphones and place the mobile phone in search mode.
4. The headphones will appear as “R” on your mobile phone.
Select these to connect your mobile phone to the headphones.
Refer to your mobile phone’s instruction manual if you are unsure.
Note:
If you are prompted to enter a PIN code on your mobile
phone, you should enter
0000
(four noughts). Certain mobile
phones may also require you to approve the connection.
5. When contact has been established the LED indicator will flash
twice every 4 seconds.
6. Turn down the volume and start playback by pressing the multi-function
button once. (You can also start playback from your mobile phone.)
7. Adjust the volume on both your mobile phone and the headphones
to achieve the desired level.
8. If you later wish to reconnect to the most recently connected device,
hold down the multi-function button for 4 seconds.
Playing music etc. via Bluetooth
Once the headphones have been connected to your mobile phone
via Bluetooth, press the multi-function button once to start playback.
In other respects playback is as described in the section above entitled
Buttons and functions.
Playing music from an SD card and/or Line-in
1. Insert an SD card containing music/speech files etc. in the headphones.
2. Turn on the headphones by holding down the multi-function button
(11) for 4 seconds until the headphones give an audible signal and
the LED indicator flashes blue.
Note:
If the headphones are already
on and connected via Bluetooth, turn off any playback via Bluetooth
by pressing the multi-function button once. Allow Bluetooth enough
time to disconnect by waiting 15 seconds before continuing.
3. Hold down [ ] for approx. 4 seconds until the LED indicator shows
a steady green. Playback from SD card begins. You may need to
press [ ] once if playback is in pause mode.
4. If required, connect the 3.5 mm cable provided between your
external audio source and Line-in (3) on the headphones (this stops
any playback from an SD card).
5. Turn down the volume and begin playback on the external device.
6. Adjust the volume on both your external device and the headphones
to achieve the desired level.
7. Control other playback settings from the external device.
8. Press [ ]
to alternate between playback from an SD card and Line-in.
9. When playing from an SD card/Line-in, use [ ] for Play/Pause.
10. Hold down [ ] for 4 seconds to switch back to playback via
Bluetooth, if required. Resume playback by pressing the multi-
function button once.
Telephone calls
When your mobile phone is connected to the headphones via Bluetooth
you can answer and deal with incoming calls using the buttons on
the headphones.
Answering incoming calls
1. The headphones give a ringtone when receiving an incoming call.
2. Press the multi-function button once to answer (you can also press
the Answer button on your mobile phone if you wish).
Ending a call
Press the multi-function button again (you can also press the End
button on your mobile phone if you wish).
Rejecting calls
Press the multi-function button for 2 seconds (you can also press
the corresponding button on your mobile phone if you wish).
Placing calls on hold
Note:
Not all mobile phones support this function.
If during a call you receive a call from someone else you may place
the first call on hold while answering the second.
1. Hold down the multi-function button for 2 seconds and answer
the second call.
2. Hold down the multi-function button again for 2 seconds to return
to the first call.
Redialling the last call
Note:
Not all mobile phones support this function.
Press the multi-function button twice.
Voice dialling
Note:
Not all mobile phones support this function.
Hold down the multi-function button for 2 seconds.
Troubleshooting chart
The speakers
will not switch
on.
• Make sure that the battery is charged. Refer to
the section
Operation-Charging
above.
• Make sure to hold down the multi-function
button for at least 4 seconds.
No sound
during
Bluetooth
playback.
• Check the volume.
• Make sure that your Bluetooth device has really
established contact with the headphones.
See the section
Pairing the headphones with
your mobile phone
above.
No sound
during SD
card or Line-in
playback.
• Check the volume.
• Check that the SD card and the files on
the card are not damaged and that they are
compatible with the headphones. Try playing
the files on another device.
• Check that the 3 mm cable used is in good
condition and correctly connected.
1. 3.5 mm Line-in
2. Micro USB connection for the charge lead provided
3. Microphone
4. [
] Selection of equaliser mode (SD card mode only):
Pop, rock, country, classic or jazz.
5. [ ] Button for selecting playback from SD card, switching playback
mode between SD card and Bluetooth, Play/Pause when playing
from SD card.
6. [ ] Switch between SD card and Line-in.
7. Micro SD card slot.
8. LED indicator
9. [ l
◄◄
] Previous track
10. [ + ] Increase volume
11. Multi-function button
12. [
►►
l ] Next track
13. [ - ] Decrease volume
Operation
Charging
1. Connect the charge lead provided to its input port (2) on
the headphones and to a USB charger or computer.
2. The LED indicator (8) will show steady red, indicating that charging
is in progress.
3. It takes approx. 3 hours to fully charge the built-in battery (the
battery is permanently installed and cannot be replaced).
4. The LED indicator will show steady blue once the battery is fully charged.
Turning on the headphones
Note:
The headphones can be turned on in various modes depen-
ding on the length of time for which the multi-function button (11) is
held down:
• 4 seconds: Hold the multifunction button in for 4 seconds until
the headphones emit an audible signal and the LED indicator
flashes blue to automatically reconnect to the last connected device.
• 8 seconds: Hold down the multi-function button for 8 seconds so
that the headphones may be detected by other Bluetooth devices.
Turning off the headphones
Hold down the multi-function button for approx. 4 seconds until
the headphones give an audible signal and the LED indicator goes out.
Declaration of Conformity
Hereby, Clas Ohlson AB declares that following product(s):
Wireless Bluetooth Stereo Headphone
Art.no: 38-5590-1, 38-5590-2, 38-5590-3
Model: R
is in compliance with the essential requirements
and other relevant provisions of Directive 1999/5/EC.
Article 3.1a (Safety):
EN 60950-1
IEC 62133
EN 62479
Article 3.1b (EMC):
EN 301489-1
EN 301489-17
Article 3.2 (Radio):
EN 300328
Insjön, Sweden, April 2013
Klas Balkow,
President.
Clas Ohlson, 793 85 Insjön, Sweden
1622
