6
English
7
5. Screw the mains lead to the underside of
the base with the cable holder (7).
Operating instructions
1. Place the infrared heater on a firm, flat and horizontal surface
at least 1.5 m away from the closest wall or combustible
material.
2. Make sure that the power switch is set to
0
before plugging
the infrared heater into a wall socket.
-
Set the power switch to
I
to turn the heater on.
-
Set the power switch to
0
and unplug the heater from
the mains when it is not in use.
•
WARNING:
The heater is only designed for normal indoor
use (IP24) and must not be used outdoors.
• If it is nevertheless used outdoors on a balcony or patio, it
should not be left unattended. It must never be left outdoors,
whether it is switched on or not.
• Switch the heater off, unplug it, let it cool down and take it
indoors if there is a risk of bad weather or rain.
Care and cleaning
We recommend that the infrared heater is cleaned at least once a month and before
storing it away.
1. Switch the infrared heater off, unplug it from the wall socket and let it cool.
2. Use a dry cloth to wipe off any dust or debris from the housing. Avoid using water,
wax, polish, solvents or other chemical solutions.
3. Make sure that there are no foreign objects inside the infrared heater.
Carefully remove any foreign objects located inside the infrared heater.
Summary of Contents for SH0760D-1
Page 2: ...2...
