English
GREAT BRITAIN •
customer service
tel:
08545 300 9799
e-mail:
customerservice@clasohlson.co.uk
internet:
www.clasohlson.com/uk
V
er
. 20
13041
6
Universal Netbook
AC/DC Adaptor
Art.no. 36-3993 Model SMP-45WUSB
Please read the entire instruction manual before use and save
it for future reference. We reserve the right for any errors in text
or images and for making any necessary technical changes to
this document. If you should have any questions concerning
technical problems please contact our Customer Services.
Caution!
• Incorrect voltage or polarity can damage your netbook.
• Do not connect the adaptor to a device with a higher power
consumption than the max. specified load.
• Do not dismantle the adaptor.
• Turn off your netbook before connecting/disconnecting
the adaptor.
• This adaptor is only intended for devices with a positive (+)
centre conductor.
• Do not expose the adaptor to moisture. For indoor use only.
• Always unplug the adaptor when it is not in use.
• The power lead should be checked regularly. Never use the
device if the power lead or plug is damaged.
Selecting the output voltage
Select the correct voltage before connecting the adaptor to
your netbook. Check the specifications on the rating plate and
the voltage marking on your adaptor input on your netbook.
Information about the operating voltage can even be found in
the instruction manual for your netbook.
Make sure that your netbook does not draw more power
than the adaptor capacity. Refer to the specifications for your
particular model.
DC Connectors
The adaptor comes with different sized interchangeable con
-
nectors. Using the table you can determine the correct sized
connector for your netbook. The connectors are coded with
letters to simplify your choice.
DC Connector
Size
Model
1.7 × 5.5 × 10 mm
Acer Aspire One
1.7 × 4.0 × 11.5 mm
HP Mini Note
1.7 × 4.75 × 9.5 mm Asus Eee
1.0 × 5.0 × 11.5 mm
Samsung NC10
2.5 × 5.5 × 12 mm
Toshiba NB 100
0,7 × 2,35 × 7 mm
Asus Eee PC 1005
Positive and negative polarities
There are two polarities for DC: positive and negative. The
AC/DC adaptor is made for devices with a positive (+) centre
conductor. The interchangeable connectors cannot be
connected incorrectly. They can only be connected in one
way which gives a positive (+) centre conductor. Make sure to
securely fasten the connector to the end of the lead and make
sure the connector is free from dust or contaminants. This is
extremely important for establishing a good connection.
Connecting to a USB device
1. It is possible to connect USB devices (iPods, MP3s, etc) to
the adaptor whilst you are charging your netbook or have it
in standby mode.
2. The output from the USB port is 5 V DC, 1 A. Do not
connect a USB device which draws more current than 1 A.
3. Connect the power lead to the adaptor before plugging the
adaptor into the wall outlet. The LED on the adaptor will
light up to indicate that it is on.
4. You can now connect the USB device.
5. The USB port is always live and can be used regardless of
the output voltage setting.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure of how to dispose of this product, please contact
your municipality.
Specifications
Adjustable stabilised output voltage: 9.5, 12, 15, 18, 19, and
20 V DC
Max load:
9.5/12 V/3.3 A
15 V / 2.5 A
18/19 V/2.1 A
20 V/2 A (40 W)
USB 5 V/1 A (max. 5 W)
Adjust the output voltage using
the switch on the back of the
adaptor. Use your fingernail to
adjust the selector switch. Bear
in mind that an incorrect voltage
setting may seriously damage
your netbook beyond repair. If
you are unsure, do not connect
the adaptor to your netbook.
Contact our Customer Services.
9.5V
12V
15V
18V
19V
20V
