GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
ENGLISH
200807
5. Make sure that the adaptor plug and lead end are
securely connected.
N.B. Check the polarity of the DC plug with a multi-
meter or another suitable instrument before connec-
ting to a load device.
6. Connect the DC plug to the load device. Make sure
that the load device is turned off before connecting
the DC plug.
7. Connect the adaptor to the mains, the LED should
light up.
8. Turn on the load device.
Care and Maintenance
Unplug the adaptor before cleaning.
Use a soft, dry cloth to clean the device.
Never use strong detergents or solvents for cleaning.
Disposal
Dispose of properly, sort and recycle
where possible. All electronic products,
batteries and packaging material etc.
should be sorted and processed according
to local environmental regulations.
Specifications
Rated Voltage
Input Power:
100 – 240 V AC, 50/60 Hz
Output Power:
3, 4.5, 5 or 6 V DC (1000 mA)
9 eller 12 V DC (500 mA)
AC/DC Adaptor
Article number 36-3310
•
Model SMP-500A
Please read the entire instruction manual before using the product and save it for future reference. We apologise for
any text or photographic errors and any changes of technical data. If you have any questions concerning technical
problems please contact our Customer Service Department.
Safety
•
The product should only be repaired by qualified
service personnel.
•
The product should not be taken apart or modified.
•
Do not place the product where it could fall into
water or other type of liquid.
•
Do not expose the product to impact or vibrations.
•
Do not short circuit the adaptor’s terminals.
•
Check that the connection’s polarity and voltage are
correctly set.
•
Do not connect devices that use more than 1000 mA.
•
Disconnect the adaptor from the mains when not
in use.
•
Make sure that the load device is turned off before
connecting it to the adaptor.
Caution:
•
Incorrect voltage or polarity can cause damage to
connected devices.
•
Turn off the connected device before you connect
or remove the adaptor plug.
•
Always check the polarity with a multimeter or
equivalent instrument if you are in the least unsure.
Product Description
•
Energy saving adaptor with auto shut-off which
completely turns off the adaptor and draws no cur-
rent if no device is connected.
•
Stabilized and adjustable output voltage 3, 4.5, 5, 6,
9, and 12V DC.
•
Max. load for 3, 4.5, 5 and 6V is 1,000 mA.
•
Max load for 9 and 12 V is 500 mA.
•
Equipped with short circuit protection.
Contents
•
AC/DC Adaptor
•
7 reversible DC connector plugs
Operating Instructions
1. Make sure that the current used by the connected
device does not exceed the adaptor’s output power.
2. Set the desired voltage on the adaptor’s control.
3. Find the adaptor plug that fits your product using
the provided adaptor ends.
4. Connect the DC plug to the lead, while checking
the polarity markings on the device that you wish to
connect. Adjust the plugs accordingly:
•
Negative (-) on the centre pin, turn the adaptor
end until the (-) symbol is seen in front of the
TIP mark.
•
Positive (+) on the centre pin, turn the plug until
the (+) symbol is seen in front of the
TIP mark.
+
+
