11
English
8. Cassette deck
1. Set the [FUNCTION] (15) selector in
TAPE
mode.
2. Push the cassette into the slot as shown below. The side that
is facing up is the one that will be played.
3. The cassette deck will start automatically once the cassette
has been pushed in.
4. The cassette deck is controlled with the
[
▲
]
(23) button:
PLAY
- Playback (button is
completely extended).
FAST FORWARD
– Fast forward (button is semi-
depressed), repress the button to deactivate fast forward
and return to playback mode.
EJECT
– Completely depress the button.
N.B.
It is normal that noise may be heard from the cassette when using (FAST FORWARD).
Always remove the cassette when you are not using the cassette deck.
9. Record player
1. Remove the pick-up protector and release the tone arm from the lock (29).
2. Set the [FUNCTION] selector (15) to th
e PHONO
position to turn on the record player.
3. Place a record onto the turntable. Some 45 rpm records have larger spindle holes and you will then
need to use the spindle adaptor (25).
4. Use the speed selector to choose the correct record speed (27).
5. Lift the tone arm using the tone arm lift lever (26) and move the tone arm over the record. The turntable
will begin spinning.
6. Carefully lower the tone arm at the beginning of the desired track (26).
7. The record will then begin playback. Adjust the volume level by using the volume buttons, [] (7)
and [VOLUME -] (8).
8. Return the tone arm to the pickup holder when playback has finished. The turntable will then stop spinning.
N.B.
Some records end outside of the record player’s “Auto-stop” – range. This means that some records may stop
playing even before finishing the last track. This can be remedied by switching [AUTO STOP] (28) to the OFF position.
N.B.
The record will continue spinning even after the last track has been played.
To stop the turntable:
Turn the [AUTO STOP] (28) switch back to the
ON
position.
Summary of Contents for TCD-983WEC
Page 2: ...2 ...
