13
English
N.B.
• Recording time occurs in real time e.g. the same as playback time.
• A folder named “AUDIO” will be created where all recordings are saved.
• The recording format is preset to MP3 with a 128 kbps bit rate and a 44.1 kHz sampling rate.
• Song titles are not saved during recording.
• In order to save a file the entire track must be recorded. If the recording is prematurely stopped then
no file will be saved onto the memory card or USB.
IV. Copying MP3 files
Copying from CD.
• If the CD only contains MP3 files any copied files will also be in this format. The steps for copying files
are the same as: “Recording from CD” (See 11.1.)
Copying between memory card and USB.
• Press [REC] (6) or (36) during playback from the memory card or USB to start copying from memory card
to USB or vice-versa.
B. Recording from the record player
1. Set the [FUNCTION] selector [15] to the
PHONO
position.
2. Press [REC] (6) or (36).
3. “USB” will be displayed first and then the
icons .
When the icons begin flashing recording will have started.
4. Start playback of the record track you wish to record.
5. When you’ve finished recording: Depress [REC] (6) or (36) until the display stops flashing.
N.B.
If you wish to start recording directly: Press [REC] (6) or (36) twice quickly.
C. Recording from the cassette deck
1. Set the [FUNCTION] (15) selector in
TAPE
mode.
2. Press [REC] (6) or (36).
3. The display will first show “USB” or “CARD” and then
. When the icon starts flashing recording has started.
4. Start playback of the cassette track you wish to record.
5. Depress [REC] (6) or (36) until the display stops flashing once you’ve finished recording.
N.B.
If you wish to start recording directly: Press [REC] (6) or (36) twice quickly.
N.B.
Files will be saved to the USB (if both a memory cards and USB is connected).
D. Manually setting the “Bit Rate” during CD, record player or cassette
recording.
1. Set the [FUNCTION] (15) selector to the
PHONO
or
TAPE
position.
2. Pressing [INFO] (35) will show the set (128 kbps) “Bit Rate”.
3. Press
[
►►
I] [I
◄◄
]
(3) or (40) to change the bit rate: 32 – 64 – 96 – 128 – 192 – 256 kbps
4. Press [INFO] (35) to confirm.
E. Track separation (TS)
To divide the recordings from the record or cassette player into several files, do the following: Press [TS] (44) once
to add a pause and create a new file where the next track will be recorded. Repeat this procedure in your recording
wherever you wish to divide your recording into several files. Every time a new file is created, the “PHONO”
or “TAPE” symbol will flash once on the display.
N.B.
This must be done during the recording process.
Summary of Contents for TCD-983WEC
Page 2: ...2 ...
