8
English
Changing the direction of rotation
1. Stop the drill.
2. Turn the reversing lever (5) to the left
or right to select the direction of
rotation you want.
Note!
The drill does not work if the rever-
sing lever is in an intermediate position.
The lever must be moved all the way in
the required direction.
Stepless speed control
1. Start the hammer drill by pressing
the trigger switch (7).
2. Turn the speed control (6)
anticlockwise to reduce the speed
and clockwise to increase it.
3. The speed control regulates how
far in the trigger switch can be
squeezed.
Note!
Always start at a low speed when
drilling without a pilot hole or centre punch
dimple. As a rule, use a higher speed with
thin drill bits and a lower speed with thick
drill bits. Generally, buffing and polishing
calls for a high speed.
