CLAS 3700461405761, Manual

HU 0050BL

PNEUMATIC BRAKE BLEEDER SET

DESCRIPTION

SAFETY

Allows to bleed hydraulic brakes and clutches thanks to its pneumatic operation working in push.

Specifications: 

- pneumatic system 

- quick-connect hose for different plugs installation 

- handle 

- maximum pressure 10 bar 

- capacity 5 liters (DOT3/DOT4/DOT5/DOT6/LHM/Pentosin/LHS)

Contents:

•  11 plugs set including universal E20

•  1 recovery jerry can

You will need the manual for safety warnings and precautions, assembly instructions, etc., so 

keep it for future use.

Warning: When using the tool, basic safety precautions should always be followed to reduce the 

risk of personal injury and equipment damage. 

Read all instructions before using this tool!

• Keep the work area clean and tidy

• Observe the condition of the work area. Do not operate machinery or power tools in damp 

or wet areas. Do not expose to rain. Keep the work area well lit. Do not use power tools in the 

presence of flammable gases or liquids.

• Keep children away. Children should never be allowed in the work area. Do not allow them to 

handle machines, tools or extension cords.

• Put away unused equipment. When not in use, tools should be stored in a dry place to prevent 

rusting. Always store tools and keep them out of reach of children.

• Use the right tool for the job. Do not try to force a small tool or attachment to do the work of a 

larger industrial tool. There are certain applications for which this tool was designed. It will do the 

job better and safer at the rate for which it was designed. Do not 

• Do not modify this tool or use it for purposes for which it was not designed. 

• Dress properly. Do not wear loose clothing or jewelry as they can be caught in moving parts. 

It is recommended that you wear non-electrically conductive protective clothing and non-slip 

footwear when working. Wear restrictive headgear to contain long hair.

• Use eye and ear protection. Always wear ANSL-approved impact goggles.

• Don't go too far. Maintain good balance at all times, do not reach over or across running 

machinery .

• Maintain tools with care. Periodically inspect tool cables and, if damaged, have them replaced 

or repaired by an authorized technician.