EQ 3000
AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN
Position of the weights in the various Program Types along the section of the rim
Angular position of the balancing weights in the various Program Types
Note (1): if the data acquisition system is disabled, the angular position of the weight will be in the 6 o’clock position.
In table T15.2 the symbol “H12” indicates that the angular position of the weight is at 12 o’clock while the symbol
“H6” indicates that the angular position of the weight is at 6 o’clock.
The machine data acquisition systems are defined as follows:
•
Semi-automatic when the Distance and Diameter data are automatically acquired with the Distance/Diameter
sensor while the data on the width must be manually entered;
•
Automatic when all data of the rim is automatically acquired with the two sensors.
Machine data
acquisition
system
Program Type
STD, ALU1,2,3,4,5
ALS1
ALS2
Internal plane
External plane
Static plane
Internal plane
External plane
Static plane
Internal plane
External plane
Static plane
Semi-
automatic
H12
H12
H12
H12
Sensor-rim
contact
point(1)
H6
Sensor-rim
contact
point(1)
Sensor-rim
contact
point(1)
H6
Automatic
H12
H12
H12
H12
Sensor-rim
contact
point(1)
H6
Sensor-rim
contact
point(1)
Sensor-rim
contact
point(1)
H6
Laser
H12
H12
H12
H12
H6
Sticker
H6
H6
Sticker
H6
Sticker
H6
