EQ 3000
AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN
The machine has two separate memories allowing two operators to work simultaneously with different settings.
This feature can make operations at the workshop quicker because when, for example, an operator is busy with removing or
remounting a tyre, the other operator can use the machine to perform balancing operations and vice versa.
In this manual, the two operators are defined as operator 1 and operator 2.
When operator 1 has completed his tasks on the machine or is involved in other activities, operator 2 can work with the machine
using the settings for the wheel type he is working on without altering the settings entered by operator 1.
When the machine is switched on, the two memories are set with the same values by default.
To select the SECON OPERATOR Program, proceed as follows:
Utility programs are available only in NORMAL mode.
Selecting the imbalance display resolution
The machine has two wheel imbalance display resolutions. The two resolutions are defined as X1 (high resolution)
and X5 (low resolution). The resolution with which the imbalances of the wheel are displayed varies depending on
the unit of weight as indicated in table below.
SECOND OPERATOR
UTILITY PROGRAMS
