EQ 3000
AUTOMATIC WHEEL BALANCER 3D WITH LCD SCREEN
The electromagnetic clamping brake is useful to block the wheel in any position and to simplify some operations such as the
application or removal of balancing weights.
The electromagnetic clamping brake is also used in the automatic or manual stopping of the wheel on imbalance positions
described in chapter 18.5 Wheel stop procedure on the positions of imbalance.
To activate and/or deactivate the ELECTROMAGNETIC BRAKE proceed as follows:
The electromagnetic clamping brake is deactivated automatically in the following cases:
• Every time a balancing launch is run;
• Every time a wheel stop procedure is performed (stop of the wheel on the imbalance position) at low speed;
• After one minute of continuous activation (to avoid overheating of the brake itself).
The electromagnetic clamping brake can be used manually only in NORMAL mode. It cannot be used in the SERVICE mode.
ELECTROMAGNETIC CLAMPING BRAKE